Simple, accurate, and easy to use pre mixed solutions in a wide range of levels
Used to assess method performance standards
Verify calibration accuracy and instrument performance
Strengthen your laboratory’s quality...
Checks performance of freezing-point osmometers in the critical area of normal serum values
Contains known and controlled quantities of some of the same solutes which comprise osmotically active particles of serum...
The Advanced Instruments 0.2 milliliter osmometer sample tubes are used in the freezing point chamber of the 3250 Osmometer
These sample tubes are made of plastic and are disposable
Effectively captures dirt and dust from foot traffic and equipment
Removable layer of adhesive mats
Specially developed adhesives coating designed to provide effective means of reducing contamination by trapping and...
Care and consideration must be taken as to adhesive mat environmental storage conditions.
Valutek mats use a water based adhesive.
Extreme cold hardens the mat adhesive and renders it ineffective.
Short-term extreme...
Mfr #: VTBFCW-21 | Manufacturer: Valutek
The bouffant cap has a filament covered unexposed elastic edge design for secure fit and unexposed closure
All Valutek™ bouffant caps are tested and manufactured in ISO...
Mfr #: VTSHCVPPLWNE-LG | Manufacturer: Valutek
Clean, low-linting and latex free fabric
Non-skid embossed PVC sole provides excellent protection against wet and smooth surfaces
Superior coefficient of friction...
This tilt specimen mount allows for easy mounting and tilting of small samples from 0° – 70°. It has index angle markings, with maximum 70° stop for EBSD. Specimen platform is 12.7mm (0.50" in diameter). Overall...
The thicker PELCO Image Tabs™ is a stiff 260µm (10mil) thick smooth conductive tab. Though not as conductive or sticky as the current 5mil PELCO Tabs™, PELCO Image Tabs™ are suitable as a photographic background and...
Pin mounts with the standard 3.2mm (1/8") pin diameter are protected and held securely in the base (cap) of the tube. Can be used for pin mounts up to 18mm diameter. Pin mounts are sold separately. Inside dimension of...
The DRI-BOX® is a small perforated plastic box containing indicating silica gel. The box is sealed on the side to prevent silica gel from spilling. The DRI-BOX® is convenient for use in smaller type desiccators of 3...
Vacuum desiccator are molded in high quality plastics which is light and easy to handle. Silicone O-ring assures tight seal down to 0°C without using grease. PP/PC material. Bottom part of the desiccators comes with...
Horizontal and crossed stage micrometers with metric or inch scales
Horizontal scales in 10, 20, 1 or 0.1mm and 0.1 inch
Crossed scales in 1x1mm
Mounted in Stainless Steel, individually numbered slide
Scales are...
Reduces Static on Surfaces
For Removing Dust from Electronics
For Removing Dust from Vinyl and CDs
Squeezing Trigger Releases Positive Ions
Releasing Trigger Releases Negative Ions
No Batteries Required
No Refills...
The Pelcotec™ CDMS-XY is easy to use and extremely convenient for quick and accurate magnification calibration of SEM, FE-SEM, FIB, CD-SEM, LM and AFM. Both the X and Y axes have graticules for easy 2-axis calibration...
Super slim tweezers with high precision, fine tips. Especially suitable for reaching in tight spaces, solvents or for working near heat sources. Made of non-magnetic stainless steel.
The PELCO® Pro Superalloy, High Precision Tweezers are manufactured using a Ni-Cr-Mo superalloy creating the highest quality tweezers. They exhibit excellent strength from room temperature up to 800°C (1472°F) with...
Snug-fitting lid prevents accidental separation if dropped
Use in mechanical freezers or liquid nitrogen tanks to –196°C
Constructed of sturdy cardboard with moisture-repellent coating
Designed with small holes on...