Check for stock
Acetonitrile (MeCN) is widely employed as a solvent in various studies and has high dielectric constant (37.5). Various purification procedures to obtain different grades of acetonitrile for use in different studies...
Valutek™ Polyethylene Adhesive Mat
- Care and consideration must be taken as to adhesive mat environmental storage conditions.
- Valutek mats use a water based adhesive.
- Extreme cold hardens the mat adhesive and renders it ineffective.
- Short-term extreme cold will not cause permanent damage but the mat must be allowed to re-equilibrate or ‘warm up’ to a minimum of 32 F before installation and use.
- Extreme heat will result in the mat adhesive breaking down and will cause permanent mat damage at temperatures over 105 F.
- To ensure the best performance of Valutek adhesive mats, the mat layers should be changed at the correct frequency.
Each removable layer of Valutek adhesive mats has a specially developed adhesive coating designed to provide an effective means of reducing contamination by trapping and preventing the transfer of particles.
| Catalog Number | VT36454P30L-B |
| Dimensions(L x W) | 36 x 45 '' |
| Material | Polyethylene |
| Color | Blue |
| Case of | 4 mats |
Recommended Products
Check for stock
Mfg P/N : 34967
For LC-MS and LC-UV trace metals analysis
HPLC / UV-VIS quality control
Low gradient baseline drift
Low levels of trace metals
No non-volatile impurities
Check for stock
90ML Vials
Leakproof containers are tested for binding properties against major drugs of abuse testing targets such as marijuana and cocaine
Made of 100% Polypropylene resin
During transport and storage,...
Check for stock
Thermo Scientific™ Capitol Vial Flip-Top Vials with Lock Seal are similar to standard flip-top vials except they contain an additional lock-seal tab.
100% FDA approved food grade polypropylene
Aseptic, airtight and...
Check for stock
Mfg P/N: 1519
Features
Borosilicate glass tubes can be used for tissue culture and blood banks
Made from superior quality borosilicate glass to reduce pH changes and contaminants that are potentially leached from...
Check for stock
Isostatically molded in pure, FDA approved, PTFE.
Heavy wall construction with super smooth internal finish.
Screw cap housing for leak-free performance
Suitable for low temperature applications.
Hand grips for ease...
Check for stock
Berkshire’s new line of low endotoxin cleanroom wipes have been engineered to meet the specific requirements of the pharmaceutical, healthcare and medical device industries.
Check for stock
Mfr. No: 4099
LCD display for continuous visualization of speed, modes, and battery status
Colored nose pieces for user or application identification
Well positioned function buttons