Check for stock
Operate with one hand; locks closed and opens when the locking tab is released
Fits tubing up to 1.3cm (1/2") O.D.; wall thickness of 0.82mm (1/32") or thinner
Circular opening (approximately 0.6cm (1/4") diameter)...
Tubings / Clamps
Filter By
Filter By
Check for stock
The BD Vacutainer® Safety-Lok™ blood collection set is simple, easy to use and safety engineered
The safety mechanism can be activated immediately after the blood draw and helps protect against needlestick injury
Check for stock
Use this clamp with tubing or hose - it will meet the working pressure of either.
High-strength polysulfone closure provides excellent durability, can be continually reused, and resists most chemicals.
Simply align...
Check for stock
Higher tensile strength than polysulfone—less likely to break
Offers quick release from locked position
Ideal for biopharma applications that require gamma irradiation or autoclave cycles
Check for stock
Smooth edges and corners help prevent punctures and ruptures
Can be installed on or over tubing or finished assemblies
High degree of leverage accommodates tubing with different durometers
Custom colours and...
Check for stock
Extension tubing for infusion systems
Common IV sets can be extended easily to have a convenient IV-therapy without length limitation
No limited flow rate for all standard applications
Should not be used as extension...
Check for stock
Flame ionization detection is the most commonly used GC detection method due to it's superior ability to measure hydrocarbons. Using a carrier gas, the sample is ionized via a hydrogen-air flame, then collected using...
Check for stock
Agilent Tubing, PTFE, 5 m, 1.5 mm id, used with G1311A/B/C, G1312A/B/C, G1310A/B - Standard System Capillaries, 400 and 600 bar (1100/1200/1260 Series)
Check for stock
Hold large workpieces with a standard-size clamp. Slide the jaws to adjust the opening size. Squeeze the handles to open the clamp; release and the spring holds it tightly in place. Clamps have plastic-covered handles...
Check for stock
Press the lever down to lock these clamps, which hold thin materials or in tight spaces.
Check for stock
Mfr #: 06833-00 | Manufacturer: Cole-Parmer
Constructed of durable Celcon plastic
Check for stock
Flexible PEEK tubing is biocompatible and chemically inert
Easily cut to desired lengths
Smooth internal surface decreases turbulence
Color-coded for easier identification
Green
1/16" OD x 0.030" ID
Check for stock
Mfr #: 96403-15, 96403-24 | Manufacturer: Heathrow Scientific
Genuine Masterflex® tubing undergoes robust testing to provide optimal performance / pump life hours with peristaltic pump equipment
Precision...
Check for stock
Global market leader in range of formulations for most extensive chemical compatibility
Check for stock
Ideal for general-purpose, single-use, and extended fluid path applications
Check for stock
Acetal copolymer
Suitable for continuous use from ambient temperature to 93°C
Non-conducting and stable in a wide variety of chemicals
Clamps stay in place once positioned
Position clamp and press jaws together with...
Check for stock
Ideal for securing plastic hose clamps.
Ensures secure fit
Check for stock
Available in 3 sizes, small, medium, and large
Constructed of nickel plated zinc
Supplied with non-slip vinyl sleeves or for temperatures above 100°C, fiberglass covers
Ideal for irregularly shaped objects
Additional...
Check for stock
Connect rods and / or clamps to your frame or build a custom lab frame
Use with 1/2" (12.7mm) diameter frame rods
Connectors and holders do not include rods; order separately
Check for stock
Use with 1/2" (12.7mm) diameter frame rods
Connectors and holders do not include rods; order separately
Check for stock
An additional holder must be purchased in order to attach clamps to lab-frames, support stands or other apparatus
Check for stock
Ideal for general-purpose, single-use, and extended fluid path applications
Global market leader in range of formulations for most extensive chemical compatibility
Single-use custom lengths and configurations...
Check for stock
Ideal for general-purpose, single-use, and extended fluid path applications
Global market leader in range of formulations for most extensive chemical compatibility
Single-use custom lengths and configurations...
Check for stock
Genuine Masterflex® tubing undergoes robust testing to provide optimal performance/pump life hours with peristaltic pump equipment
Precision extruded to tight tolerances for high repeatability, accuracy, and...
Check for stock
Genuine Masterflex® tubing undergoes robust testing to provide optimal performance / pump life hours with peristaltic pump equipment
Precision extruded to tight tolerances for high repeatability, accuracy and...
Check for stock
Genuine Masterflex® tubing undergoes robust testing to provide optimal performance / pump life hours with peristaltic pump equipment
Precision extruded to tight tolerances for high repeatability, accuracy and...
Check for stock
Genuine Masterflex® tubing undergoes robust testing to provide optimal performance / pump life hours with peristaltic pump equipment
Precision extruded to tight tolerances for high repeatability, accuracy and...
Check for stock
Genuine Masterflex® tubing undergoes robust testing to provide optimal performance / pump life hours with peristaltic pump equipment
Precision extruded to tight tolerances for high repeatability, accuracy and...
Check for stock
Genuine Masterflex® tubing undergoes robust testing to provide optimal performance / pump life hours with peristaltic pump equipment
Precision extruded to tight tolerances for high repeatability, accuracy and...
Check for stock
Genuine Masterflex® tubing undergoes robust testing to provide optimal performance / pump life hours with peristaltic pump equipment
Precision extruded to tight tolerances for high repeatability, accuracy and...
Check for stock
Mainly with the iron frame table, for clamping fixed containers, such as flasks, condenser tubes, test tubes, etc.
Check for stock
Mainly with the iron frame table, for clamping fixed containers, such as flasks, condenser tubes, test tubes, etc.
Check for stock
Polypropylene construction
Autoclavable
Check for stock
Lab clamp ring is made of high-quality stainless steel, which is durable and not easy to deform.
The lab clamp holder is easy to install and remove, convenient to use. it's also suitable for laboratories that...
Check for stock
Mfr #: 30392206 | Manufacturer: Troemner
Designed to securely hold laboratory glassware and apparatus. Extension armattaches clamp head securely and offers easy positioning in the deepest fumehoods.
Constructed...
Check for stock
Mfr #: 8701-9030 | Manufacturer: ThermoFisher Scientific
Lab-grade, autoclavable clear tubing sets the standard for purity and quality, made from highest-grade resins and plasticizers
Free from ortho phthalate...
Check for stock
Mfr #: 610855-31 | Manufacturer: Dynalon
This Dynalon Vinyl Laboratory Tubing is non-toxic, flexible, and inert. It has a tensile strength of 2000 psi and is suitable for low-pressure applications. It is...
Check for stock
Mfr #: MFLA06822-11 | Manufacturer: Masterflex
The Pure-Fit TC clamp has a press-down locking mechanism that provides complete fluid stoppage. Its side-release mechanism ensures against unwanted opening. The open...
Check for stock
Mfr #: 427435 | Manufacturer: BD
Flexible and durable over a wide temperature range, up to 104°C (219°F)
Chemically pure: no additives or plasticizers
Low water absorption rate
Low specific gravity: 0.92 at 25°C...
Check for stock
Mfr #: 96410-17 | Manufacturer: Masterflex
Genuine Masterflex® tubing undergoes robust testing to provide optimal performance / pump life hours with peristaltic pump equipment
Precision extruded to tight...