Convenience and lower costs—Reduced health, safety and environmental requirements and paperwork
Very low temperature coefficient of variation—Reduces measurement errors and enables non-temperature controlled...
Packaged in easy-to-use, peel-and-reseal bags, reducing solution evaporation that preserves the consistent wiper wetness level
Provide consistent, optimized cleaning efficiency with repeatable wetness and VOC levels...
Excellent wet and dry strength due to the polyester
Highly absorbent due to the cellulose
Compatible with most solvents
Contains no chemical binders
Low extractable levels
Cleaning and disinfecting hard, non-porous surfaces
Cleaning and disinfecting small surfaces (tables, equipment, isolators, hoods)
Cleaning and disinfecting large surfaces (floors, walls, ceilings)
Recommended for...
Certified Low TOC level (<50 µg/L, <50 ppb) ensures consistency in swab background contribution
Double layered, double knit polyester head entraps contaminants in the knit structure during sampling This allows...
Double layer of polyester knit fabric for enhanced absorbency
Engineered to resist snagging and abrading, preventing the release of particles and fibers
Excellent chemical compatibility with a variety of solutions...
Good chemical compatibility with a variety of solutions
Readily absorbs solvents and solutions and grabs particulates.
100% polypropylene handle ensures no additional contaminants are introduced while offering...
VIALS
Prewashed borosilicate glass vials have a one-piece cap and septa design for easy sampling and analysis
Septum thickness – 1.34 mm (0.053")
Polyethylene overcap protects septum surface from contamination until...
Low levels of ions, NVRs (non-volatile residues), particles and fibers for use in critical cleaning applications and environments.
Excellent chemical resistance for compatibility with a variety of solutions
Meets USP...
Double layer of non woven polyester fabric for enhanced absorbency
Hydro-entangled polyester for use on sensitive surfaces
Excellent chemical resistance for compatibility with a variety of solutions
Cleanroom...
This tilt specimen mount allows for easy mounting and tilting of small samples from 0° – 70°. It has index angle markings, with maximum 70° stop for EBSD. Specimen platform is 12.7mm (0.50" in diameter). Overall...
The thicker PELCO Image Tabs™ is a stiff 260µm (10mil) thick smooth conductive tab. Though not as conductive or sticky as the current 5mil PELCO Tabs™, PELCO Image Tabs™ are suitable as a photographic background and...
Pin mounts with the standard 3.2mm (1/8") pin diameter are protected and held securely in the base (cap) of the tube. Can be used for pin mounts up to 18mm diameter. Pin mounts are sold separately. Inside dimension of...
The DRI-BOX® is a small perforated plastic box containing indicating silica gel. The box is sealed on the side to prevent silica gel from spilling. The DRI-BOX® is convenient for use in smaller type desiccators of 3...
Vacuum desiccator are molded in high quality plastics which is light and easy to handle. Silicone O-ring assures tight seal down to 0°C without using grease. PP/PC material. Bottom part of the desiccators comes with...
Horizontal and crossed stage micrometers with metric or inch scales
Horizontal scales in 10, 20, 1 or 0.1mm and 0.1 inch
Crossed scales in 1x1mm
Mounted in Stainless Steel, individually numbered slide
Scales are...
Reduces Static on Surfaces
For Removing Dust from Electronics
For Removing Dust from Vinyl and CDs
Squeezing Trigger Releases Positive Ions
Releasing Trigger Releases Negative Ions
No Batteries Required
No Refills...
The Pelcotec™ CDMS-XY is easy to use and extremely convenient for quick and accurate magnification calibration of SEM, FE-SEM, FIB, CD-SEM, LM and AFM. Both the X and Y axes have graticules for easy 2-axis calibration...
Super slim tweezers with high precision, fine tips. Especially suitable for reaching in tight spaces, solvents or for working near heat sources. Made of non-magnetic stainless steel.
The PELCO® Pro Superalloy, High Precision Tweezers are manufactured using a Ni-Cr-Mo superalloy creating the highest quality tweezers. They exhibit excellent strength from room temperature up to 800°C (1472°F) with...
Sleek, clear jar for cosmetics or creams.
Jars withstand extreme temperatures of 0° to 850°F.
Plastic lids for general purpose use.
FDA compliant.
Caps included.
If tape has been lifted or removed, a highly visible "OPENED" message appears on the box.
Consecutively numbered every 9 inches - Makes every strip of tape different.
Meets TSA regulations.
Vacuum tight – Use with granulars, fine powders.
Tamper evident with use of cable ties.
Lid includes neoprene gasket for moisture-resistant storage.
Molded, high-density polyethylene.
FDA compliant.
Fitted bottom and expandable sides form to the shape of your product.
100% virgin, high clarity polyethylene film.
Meets FDA and USDA specifications.
Larger sizes for use as liners for cartons or large bins.
Mfr #: TX3280 | Manufacturer: Texwipe
AlphaSat® with Vectra® Alpha® 10 TX3280 sterile pre-wetted cleanroom wipers are made from 100% polyester with a sealed-border, processed on Texwipe’s automated Vectra®...