Check for stock
Sensor Scientific thermistor based Temperature Sensor assemblies are used in industrial analytical instruments, automotive air-conditioning systems, thermistors also monitor temperature of lithium-Ion power packs in...
Products
Filter By
Filter By
Check for stock
This tilt specimen mount allows for easy mounting and tilting of small samples from 0° – 70°. It has index angle markings, with maximum 70° stop for EBSD. Specimen platform is 12.7mm (0.50" in diameter). Overall...
Check for stock
Service Temperature: 105°C (225°F)
Solids content (silver): 57.5 to 59%
Binder: Thermoplastic resin
Carrier: methyl iso-butylketone
Sheet resistance (on Lexan panels, dried 30 min/70°C): <0.015 ohms/sq/mil (25µm)
Check for stock
The thicker PELCO Image Tabs™ is a stiff 260µm (10mil) thick smooth conductive tab. Though not as conductive or sticky as the current 5mil PELCO Tabs™, PELCO Image Tabs™ are suitable as a photographic background and...
Check for stock
Pin mounts with the standard 3.2mm (1/8") pin diameter are protected and held securely in the base (cap) of the tube. Can be used for pin mounts up to 18mm diameter. Pin mounts are sold separately. Inside dimension of...
Check for stock
The DRI-BOX® is a small perforated plastic box containing indicating silica gel. The box is sealed on the side to prevent silica gel from spilling. The DRI-BOX® is convenient for use in smaller type desiccators of 3...
Check for stock
Vacuum desiccator are molded in high quality plastics which is light and easy to handle. Silicone O-ring assures tight seal down to 0°C without using grease. PP/PC material. Bottom part of the desiccators comes with...
Check for stock
Horizontal and crossed stage micrometers with metric or inch scales
Horizontal scales in 10, 20, 1 or 0.1mm and 0.1 inch
Crossed scales in 1x1mm
Mounted in Stainless Steel, individually numbered slide
Scales are...
Check for stock
Reduces Static on Surfaces
For Removing Dust from Electronics
For Removing Dust from Vinyl and CDs
Squeezing Trigger Releases Positive Ions
Releasing Trigger Releases Negative Ions
No Batteries Required
No Refills...
Check for stock
The Pelcotec™ CDMS-XY is easy to use and extremely convenient for quick and accurate magnification calibration of SEM, FE-SEM, FIB, CD-SEM, LM and AFM. Both the X and Y axes have graticules for easy 2-axis calibration...
Check for stock
Super slim tweezers with high precision, fine tips. Especially suitable for reaching in tight spaces, solvents or for working near heat sources. Made of non-magnetic stainless steel.
Check for stock
The PELCO® Pro Superalloy, High Precision Tweezers are manufactured using a Ni-Cr-Mo superalloy creating the highest quality tweezers. They exhibit excellent strength from room temperature up to 800°C (1472°F) with...
Check for stock
Mfr #: CG-1946-D-01, CG-1946-D-05 | Manufacturer: Chemglass
Five neck vessel lid to fit CG-1920 through CG-1936 vessels. Two side necks are vertical and two necks have a 10° degree angle. Angled side neck is...
Check for stock
Mfr #: CG-1929-X15, CG-1929-X18 | Manufacturer: Chemglass
Tool-Free™ Jacket Connection Design Allows Hose to be Attached or Removed by Hand Without Using Tools
Chemically Resistant Perfluoro O-Rings on All...
Check for stock
Mfr #: CG-1403-15 | Manufacturer: Chemglass
Water jacket enclosing the funnel bowl and upper portion of the stem. Jacket permits heating or cooling of the contents of the funnel during filtration. Stem length...
Check for stock
Mfr #: CG-1710-01, CG-1710-15 | Manufacturer: Chemglass
Cylindrical style addition funnel graduated with a double scale of numbers, one up from the stopcock and one down from the capacity line.
With a standard taper...
Check for stock
Isostatically molded in pure, FDA approved, PTFE.
Heavy wall construction with super smooth internal finish.
Screw cap housing for leak-free performance
Suitable for low temperature applications.
Hand grips for ease...