Simple, accurate, and easy to use pre mixed solutions in a wide range of levels
Used to assess method performance standards
Verify calibration accuracy and instrument performance
Strengthen your laboratory’s quality...
Checks performance of freezing-point osmometers in the critical area of normal serum values
Contains known and controlled quantities of some of the same solutes which comprise osmotically active particles of serum...
The Advanced Instruments 0.2 milliliter osmometer sample tubes are used in the freezing point chamber of the 3250 Osmometer
These sample tubes are made of plastic and are disposable
Operate with one hand; locks closed and opens when the locking tab is released
Fits tubing up to 1.3cm (1/2") O.D.; wall thickness of 0.82mm (1/32") or thinner
Circular opening (approximately 0.6cm (1/4") diameter)...
One canister of Reusable Desi-Can™ Canister maintains a safe level of humidity in 0.09 cubic meter (3 cubic ft.) of space
Can be regenerated in a 150º C (300º F) oven in about 3 hours for unlimited life
Monitor...
Special blend of autoclavable polypropylene is heavier than water so rack remains stable at the bottom of water baths or ice baths
All racks have a base and two tiers of grids with numbered and lettered rows for...
Heat-cured epoxy coating is unaffected by organic solvents, salts, weak acids and weak alkalis
Steam autoclavable at 121 degree C (250 degree F)
Temperature range: -223° to +121°C (-369° to +250°F)
Supports 50ml...
Designed for ULT freezer storage at temperatures down to -86°C
Durable and impervious to moisture
Clear polycarbonate lid and base, and alpha-numeric index make it easy to identify samples within the box
Two boxes...
Highly absorbent upper surface traps up to 420ml/m² of water, dyes, corrosive chemicals or radioactive solutions
Flexible polyethylene film backing is non-skid and prevents soak-through of most solutions
Available in...
60 and 125ml scoops have a longer handle that increases the distance between the hand and sample
Rugged polypropylene; steam autoclavable at 121ºC (250ºF)
Comply with FDA regulations for food, drug and cosmetic use...
This tilt specimen mount allows for easy mounting and tilting of small samples from 0° – 70°. It has index angle markings, with maximum 70° stop for EBSD. Specimen platform is 12.7mm (0.50" in diameter). Overall...
The thicker PELCO Image Tabs™ is a stiff 260µm (10mil) thick smooth conductive tab. Though not as conductive or sticky as the current 5mil PELCO Tabs™, PELCO Image Tabs™ are suitable as a photographic background and...
Pin mounts with the standard 3.2mm (1/8") pin diameter are protected and held securely in the base (cap) of the tube. Can be used for pin mounts up to 18mm diameter. Pin mounts are sold separately. Inside dimension of...
The DRI-BOX® is a small perforated plastic box containing indicating silica gel. The box is sealed on the side to prevent silica gel from spilling. The DRI-BOX® is convenient for use in smaller type desiccators of 3...
Vacuum desiccator are molded in high quality plastics which is light and easy to handle. Silicone O-ring assures tight seal down to 0°C without using grease. PP/PC material. Bottom part of the desiccators comes with...
Horizontal and crossed stage micrometers with metric or inch scales
Horizontal scales in 10, 20, 1 or 0.1mm and 0.1 inch
Crossed scales in 1x1mm
Mounted in Stainless Steel, individually numbered slide
Scales are...
Reduces Static on Surfaces
For Removing Dust from Electronics
For Removing Dust from Vinyl and CDs
Squeezing Trigger Releases Positive Ions
Releasing Trigger Releases Negative Ions
No Batteries Required
No Refills...
The Pelcotec™ CDMS-XY is easy to use and extremely convenient for quick and accurate magnification calibration of SEM, FE-SEM, FIB, CD-SEM, LM and AFM. Both the X and Y axes have graticules for easy 2-axis calibration...
Super slim tweezers with high precision, fine tips. Especially suitable for reaching in tight spaces, solvents or for working near heat sources. Made of non-magnetic stainless steel.
The PELCO® Pro Superalloy, High Precision Tweezers are manufactured using a Ni-Cr-Mo superalloy creating the highest quality tweezers. They exhibit excellent strength from room temperature up to 800°C (1472°F) with...
Individually sealed and sterilized in a polyethylene bag
Bright red color reduces the chance of the scoop being accidentally left behind in a sample; can serve as a code to avoid cross contamination and provide...
60 and 125ml scoops have a longer handle that increases the distance between the hand and sample
Rugged polypropylene; steam autoclavable at 121ºC (250ºF)
Comply with FDA regulations for food, drug and cosmetic use...
Handles are 2.9cm (1⅛”) in diameter and welded to a rigid sampling bowl at a 45° angle for easier sampling from an elevated position
Choose from a variety of handle lengths; hook at end for hanging storage
Hardwood...