Mfr #: 898862802 | Manufacturer: DWK Life Sciences
Outstanding temperature resistance from –196 to + 260 °C
Very high chemical resistance
High leak-tightness through use of PTFE coated silicone seal
No dye...
Mfr #: 1092676 | Manufacturer: DWK Life Sciences
Very good chemical resistance and good heat resistance (max. thermal load +135 °C), constant loads longer than 30 mins should be avoided
Minimal thermal...
Mfr #: 218052453 | Manufacturer: DWK Life Sciences
Very good chemical resistance and good heat resistance (max. thermal load +135 °C), constant loads longer than 30 mins should be avoided
Minimal thermal...
Mfr #: SCOT1088678 | Manufacturer: DWK Life Sciences
Highly chemically resistant material (TPCh260), no added colours (any interference with the medium is avoided), temperature resistant from −196 to +200 °C
PTFE...
Mfr #: SCOT891088679 | Manufacturer: DWK Life Sciences
Outstanding temperature resistance from –196 to + 260 °C
Very high chemical resistance
High leak-tightness through use of PTFE coated silicone seal
No dye...
Mfr #: SCOT818013608 | Manufacturer: DWK Life Sciences
Made from DURAN® borosilicate glass 3.3 Type I
Protective dust cover is applied in-line at the end of the manufacturing process while the glass still has a...
Cellulose based wrap for steam and EO sterilization
Efficient microbial barrier, high-level of protection against fluids and particles
Highly permeable meaning no wet packs
Variety of strength of fabric to meet your...
This tilt specimen mount allows for easy mounting and tilting of small samples from 0° – 70°. It has index angle markings, with maximum 70° stop for EBSD. Specimen platform is 12.7mm (0.50" in diameter). Overall...
The thicker PELCO Image Tabs™ is a stiff 260µm (10mil) thick smooth conductive tab. Though not as conductive or sticky as the current 5mil PELCO Tabs™, PELCO Image Tabs™ are suitable as a photographic background and...
Pin mounts with the standard 3.2mm (1/8") pin diameter are protected and held securely in the base (cap) of the tube. Can be used for pin mounts up to 18mm diameter. Pin mounts are sold separately. Inside dimension of...
The DRI-BOX® is a small perforated plastic box containing indicating silica gel. The box is sealed on the side to prevent silica gel from spilling. The DRI-BOX® is convenient for use in smaller type desiccators of 3...
Vacuum desiccator are molded in high quality plastics which is light and easy to handle. Silicone O-ring assures tight seal down to 0°C without using grease. PP/PC material. Bottom part of the desiccators comes with...
Horizontal and crossed stage micrometers with metric or inch scales
Horizontal scales in 10, 20, 1 or 0.1mm and 0.1 inch
Crossed scales in 1x1mm
Mounted in Stainless Steel, individually numbered slide
Scales are...
Reduces Static on Surfaces
For Removing Dust from Electronics
For Removing Dust from Vinyl and CDs
Squeezing Trigger Releases Positive Ions
Releasing Trigger Releases Negative Ions
No Batteries Required
No Refills...
The Pelcotec™ CDMS-XY is easy to use and extremely convenient for quick and accurate magnification calibration of SEM, FE-SEM, FIB, CD-SEM, LM and AFM. Both the X and Y axes have graticules for easy 2-axis calibration...
Super slim tweezers with high precision, fine tips. Especially suitable for reaching in tight spaces, solvents or for working near heat sources. Made of non-magnetic stainless steel.
The PELCO® Pro Superalloy, High Precision Tweezers are manufactured using a Ni-Cr-Mo superalloy creating the highest quality tweezers. They exhibit excellent strength from room temperature up to 800°C (1472°F) with...
Mfr #: 60831D-843 | Manufacturer: DWK Life Sciences
Converted from Type I, 51 expansion borosilicate glass tubing.
White polyethylene plug style needle closures, unattached
Mfr #: 246781052 | Manufacturer: DWK Life Sciences
Complies with ISO 1042
Outstanding precision during volumetric measurement and high-quality process stability
Calibration based on the poured in volume (“In”) at...
Mfr #: 218011753, 218012458, 218013651, 218014459, 218015455, 218016357, 218017353 | Manufacturer: DWK Life Sciences
Complies with the standards in ISO 4796-1:2016 Laboratory glassware -- Bottles -- Part 1:...
Mfr #: 21802-200 | Manufacturer: DWK Life Sciences
Drip tip is provided at the lower end.
Inner tube has twelve sets of rings of indentations spaced approximately 14mm apart.
Sets are alternately horizontal and...
Mfr #: 14390-0500 | Manufacturer: DWK Life Sciences
Ideal for storage and transport of high value substances.
Wide-mouth for ease of use filling and dispensing
Quick release blue PP closure and pour ring included...
Mfr #: 850400-1420 | Manufacturer: DWK Life Sciences
Hollow, hexagonal head medium length Standard Taper stopper that is easily gripped
May be set on the flattened top to avoid contamination of the ground...
Mfr #: 5121628V-25 | Manufacturer: DWK Life Sciences
Kimble® Amber Boston Rounds are made from Type III soda-lime glass and have a narrow-mouth design. Amber bottles are designed to protect contents from UV rays...
Mfr #: 62121D-10 | Manufacturer: DWK Life Sciences
Converted from Type I borosilicate glass tubing
Serum vials are lighter in weight than molded bottles, with more closely held tolerances and uniformity of glass...
Mfr #: 74503-7 | Manufacturer: DWK Life Sciences
Converted from Type I, 33 expansion borosilicate glass tubing.
Each cellular tray contains 100 vials and has alphanumeric coordinates for fast, easy...
Mfr #: 63B92 | Manufacturer: DWK Life Sciences
DWK Life Sciences Kimble® Disposable Glass Pasteur Pipets are suitable for use in hematology, bacteriology, and in general laboratory applications, these are an...
Mfr #: 14393-0250 | Manufacturer: DWK Life Sciences
Get versatility, purity and durability to achieve results for laboratory storage, bioprocess and production applications.
Wide-mouth
3.3 borosilicate glass...
Mfr #: 986700 | Manufacturer: DWK Life Sciences
Converted from Type I borosilicate glass tubing, PET, or HDPE
Available with cap attached, caps packed separately or without cap
Background counts are consistent...
Mfr #: 225145 | Manufacturer: DWK Life Sciences
Converted from Type I borosilicate glass tubing
Culture vials feature deep-skirted screw caps to allow safer, more dependable handling when working with infectious...
Mfr #: W225223-01 | Manufacturer: DWK Life Sciences
Choose clear or amber borosilicate glass vial
12 x 32mm LVI™ Vial & 11mm Aluminum E-Z Seal™
Writing patch on all vials
Mfr #: 15040G-60 | Manufacturer: DWK Life Sciences
DWK Life Sciences Kimax® Glass Dropping Bottles have a wide range of laboratory applications. Choose from clear and amber bottles, depending on needs.
Clear...
Mfr #: 5410458V-21, 5410870V-21 | Manufacturer: DWK Life Sciences
Manufactured from soda-lime glass conforming to USP Type III and ASTM E438, Type II requirements
Clear glass allows for easy viewing of contents...
Mfr #: W224582 | Manufacturer: DWK Life Sciences
Clear vials are converted from Type I borosilicate glass tubing
Amber vials are converted from amber borosilicate glass tubing that conforms to USP Type I...
Mfr #: W240418 | Manufacturer: DWK Life Sciences
Rubber lined caps feature a nontoxic white styrene-butadiene rubber liner ideal for cell culture work
Aluminum foil faced pulp board liners can be used with...
Mfr #: 456000-0022 | Manufacturer: DWK Life Sciences
For use in refluxing operations, including Soxhlet extractions. Allihn Condenser has straight outlet tube at top and 45/50 ground glass inner drip joint at...
Mfr #: 20025J-10 | Manufacturer: DWK Life Sciences
Manufactured from borosilicate glass 3.3
''TD'' appears on each cylinder and indicates the cylinder is calibrated to deliver
The 10 mL size has an enlarged...