11” x 16.2” x 5.75” OD Silver MylarFoil Stand Up pouch with ZipSeal, tear notch and rounded cornersZipSeal is at 1.25" from the top of the MylarFoil bag
The Lovo Ancillary Bag Kit is a single unit comprising of a 2.5 L bag with injection site, male luer with non-vented cap, and female luer with vented cap.
Single use kit for reagent addition and/or sampling during cell processing. The Lovo Pouch Kit has a sterile fluid path and is comprised of an approximately 8 mL pouch component with a swabable, needleless...
(1) Spinning membrane separation device with 21μm membrane thickness and 4μm diameter pores
(1) Source product line with a 0.2μm kit check vent
(2) Solution lines, each a with solid plug
(1) 800 mL In-Process bag with...
High purity reagents tested for use in biotechnology applications, such as electrophoresis, and liquid chromatography. For Liquid Chromatography and Molecular Biology Applications
Mfr #:4072-01-500G | Manufacturer: J.T. Baker
Protect and stabilize valuable biochemical proteins and streamline your downstream processing with reliable, high-performance sugars.
BAKER INSTRA-ANALYZED® grade acids are ideal for routine trace metal analysis and EPA protocols by ICP-OES/AES. They are tested and certified in the very low ppb range for up to 35 metals.
Mfr #: CG-1946-D-01, CG-1946-D-05 | Manufacturer: Chemglass
Five neck vessel lid to fit CG-1920 through CG-1936 vessels. Two side necks are vertical and two necks have a 10° degree angle. Angled side neck is...
Mfr #: CG-1929-X15, CG-1929-X18 | Manufacturer: Chemglass
Tool-Free™ Jacket Connection Design Allows Hose to be Attached or Removed by Hand Without Using Tools
Chemically Resistant Perfluoro O-Rings on All...
Mfr #: CG-1403-15 | Manufacturer: Chemglass
Water jacket enclosing the funnel bowl and upper portion of the stem. Jacket permits heating or cooling of the contents of the funnel during filtration. Stem length...
Mfr #: CG-1710-01, CG-1710-15 | Manufacturer: Chemglass
Cylindrical style addition funnel graduated with a double scale of numbers, one up from the stopcock and one down from the capacity line.
With a standard taper...
Isostatically molded in pure, FDA approved, PTFE.
Heavy wall construction with super smooth internal finish.
Screw cap housing for leak-free performance
Suitable for low temperature applications.
Hand grips for ease...