Check for stock
Mfr #: 3611017 | Manufacturer: B Braun
Sterile Water for Injection USP is a clear, colorless, odorless liquid. It is sterile, hypotonic, nonpyrogenic, and contains no bacteriostatic or antimicrobial agents. It is a...
Products
Filter By
Filter By
Filter By
Check for stock
0.9% Sodium Chloride Injection, USP is a sterile, nonpyrogenic, isotonic solution of sodium chloride and water for injection. Each mL contains sodium chloride 9 mg. It contains no bacteriostat, antimicrobial agent or...
Check for stock
Hypodermic Syringes for single use without needle
Made of Polypropylene/Polyisoprene
Highly transparent barrel
High contrast black graduation
Permanent marking
Easily readable
Safe plunger backstop
Piston with double...
Check for stock
High quality blades from Aesculap come sterile and individually wrapped. The alloy has a high carbon content which provides a longer lasting cutting edge. Not autoclavable.
Check for stock
Swabbable
Compatible with Luer-Slip and Luer-Lock
Allows multiple access for direct aspiration or fluid injection
Suitable for all IV Systems
Check for stock
Extension tubing for infusion systems
Common IV sets can be extended easily to have a convenient IV-therapy without length limitation
No limited flow rate for all standard applications
Should not be used as extension...
Check for stock
Thin-walled needles
Made of stainless, chromium-nickel steel
Smooth surface with light silicone coating
Minimal pain upon puncture
Transparent Luer-Lock plastic hub
Made of Polypropylene (needle hub)
Check for stock
Moistening of tissue and cleansing of the operating area during surgical procedures
Rinsing of wounds in the event of injuries and burns
Cleansing during stoma care
Moistening of wound tamponades, cloths, bandages,...
Check for stock
This tilt specimen mount allows for easy mounting and tilting of small samples from 0° – 70°. It has index angle markings, with maximum 70° stop for EBSD. Specimen platform is 12.7mm (0.50" in diameter). Overall...
Check for stock
Service Temperature: 105°C (225°F)
Solids content (silver): 57.5 to 59%
Binder: Thermoplastic resin
Carrier: methyl iso-butylketone
Sheet resistance (on Lexan panels, dried 30 min/70°C): <0.015 ohms/sq/mil (25µm)
Check for stock
The thicker PELCO Image Tabs™ is a stiff 260µm (10mil) thick smooth conductive tab. Though not as conductive or sticky as the current 5mil PELCO Tabs™, PELCO Image Tabs™ are suitable as a photographic background and...
Check for stock
Pin mounts with the standard 3.2mm (1/8") pin diameter are protected and held securely in the base (cap) of the tube. Can be used for pin mounts up to 18mm diameter. Pin mounts are sold separately. Inside dimension of...
Check for stock
The DRI-BOX® is a small perforated plastic box containing indicating silica gel. The box is sealed on the side to prevent silica gel from spilling. The DRI-BOX® is convenient for use in smaller type desiccators of 3...
Check for stock
Vacuum desiccator are molded in high quality plastics which is light and easy to handle. Silicone O-ring assures tight seal down to 0°C without using grease. PP/PC material. Bottom part of the desiccators comes with...
Check for stock
Horizontal and crossed stage micrometers with metric or inch scales
Horizontal scales in 10, 20, 1 or 0.1mm and 0.1 inch
Crossed scales in 1x1mm
Mounted in Stainless Steel, individually numbered slide
Scales are...
Check for stock
Reduces Static on Surfaces
For Removing Dust from Electronics
For Removing Dust from Vinyl and CDs
Squeezing Trigger Releases Positive Ions
Releasing Trigger Releases Negative Ions
No Batteries Required
No Refills...
Check for stock
The Pelcotec™ CDMS-XY is easy to use and extremely convenient for quick and accurate magnification calibration of SEM, FE-SEM, FIB, CD-SEM, LM and AFM. Both the X and Y axes have graticules for easy 2-axis calibration...
Check for stock
Super slim tweezers with high precision, fine tips. Especially suitable for reaching in tight spaces, solvents or for working near heat sources. Made of non-magnetic stainless steel.
Check for stock
The PELCO® Pro Superalloy, High Precision Tweezers are manufactured using a Ni-Cr-Mo superalloy creating the highest quality tweezers. They exhibit excellent strength from room temperature up to 800°C (1472°F) with...
Check for stock
Mfr #: 3617858
You have a low level of body fluids (isotonic dehydration)
You have a low level of body fluids and your blood sodium level is abnormally low (hypotonic dehydration)
You have a low blood chloride level...