Simple, accurate, and easy to use pre mixed solutions in a wide range of levels
Used to assess method performance standards
Verify calibration accuracy and instrument performance
Strengthen your laboratory’s quality...
Checks performance of freezing-point osmometers in the critical area of normal serum values
Contains known and controlled quantities of some of the same solutes which comprise osmotically active particles of serum...
The Advanced Instruments 0.2 milliliter osmometer sample tubes are used in the freezing point chamber of the 3250 Osmometer
These sample tubes are made of plastic and are disposable
Permanent white enamel graduations with marking spots
Glass bead indicates full capacity line
Very good temperature resistance, very good chemical resistance
Complies with ISO 1042 and DIN 12664
Calibrated to the tolerance required by the United States Pharmacopoeia (USP) which is tighter than those of ISO/DIN standards
Each flask is laser etched with an individual serial...
Made of borosilicate glass code 7740 with an extra heavy duty glass wall that significantly increases durability
Funnel-like threaded top and EZ Access™ wide neck design allow for easy filling and mixing of various...
Capacity: 25mL; Graduated Intervals: 0.2mL
"Shorty" disposable serological pipets have tapered tips which make pipetting faster and easier
Plugged & Sterile, Steri-View™ Individually Wrapped & Disposable...
Highly breathable fabric releases heat while maintaining a high level of protection
Garments feature elastic in high movement areas for ease of movement and appropriate fit
100% bound seam construction for increased...
Reduced training time and gowning time because the sleeve is pre-folded to be gowned right
Better efficiency and performance in gowning qualifications and re-qualifications
Risk of operator contamination is greatly...
Veltek® CleanPrint10 is a low particulate and non-shedding synthetic writing substrate for use in cleanrooms. It is exceptionally durable, tear, abrasion and chemical resistant, easy to write on, and double bagged...
Prefiltered to 0.2 µm
Completely traceable and validated for sterility and shelf life
Sterile WFI solutions use USP Water for Injection, are gamma irradiated
Solution available in nonsterile, sterile, and sterile WFI...
Prefiltered to 0.2 um
Completely traceable and validated for sterility and shelf life
60% and 91% formulated with USP Water for Injection, and are gamma irradiated; 99% manufactured via aseptic filtration.
Effective as a broad spectrum hospital disinfectant, fungicide, deodorizer, virucide
Food and non-food contact sanitizer effective against a broad spectrum of pathogenic bacteria
Available as both sterile and...
For removal of chemical residues, spotting and staining on stainless-steel surfaces without leaving a powdery residue.
Ideal on stainless steel, chromes, brass aluminum, or copper.
Filtered at 0.2 μ
Gamma irradiated
Each sterile container is double bagged in easy tear packaging
Quadruple bagged in the ABCD Cleanroom Introduction System®
Individually labeled with lot number and expiration
Delivered with lot specific analytical...
Filled in an ISO 5 (Grade A/B, Former Class 100)
Prefiltered to 0,2 um
Completely traceable and validated for sterility and shelf life
Avaliable in 3% and 6% concentrations
16 oz and 32 oz containers come with...
Available in ABCD Cleanroom Introduction SystemTM
Formulated with WFI
Validated for sterility and shelf life
Available in two different percentage solutions of Hydrogen Peroxide at 3% or 6% to fit specific needs
100%...
Each sterile bag is double bagged in easy tear bags
Quadruple bagged via the ABCD Cleanroom Introduction System®
Packaged in an opaque bag
Individually labeled with lot number and expiration
Reduces VOC emissions
Low...
ISO 4 (Class 10) Cleanliness
Delivered with lot specific documentation
Validated for sterility and shelf life
12”x12” in size
Removes residues from disinfecting agents
Re-sealable packaging
100% synthetic filament...
Available in ABCD Cleanroom Introduction System®
Formulated with WFI
Validated for sterility and shelf life
Available in three different percentage solutions of Sodium Hypochlorite at 0.25%, 0.52%, or 5.25% to fit...
Mfr #: 606065 | Manufacturer: Dynalon
Dynalon® Flat Bottom Plastic Scoops are made from High Density Polyethylene. The flat bottom makes them useful in many industrial and laboratory applications. They come six to...
Mfr #: 225645-0001 | Manufacturer: Dynalon
The Dynalon Wet/Dry Test Tube Rack holds 90 x 13 mm dia. tubes and provides excellent stability, even in circulating water baths. The bright red color makes it easy to...
Mfr #: 610855-31 | Manufacturer: Dynalon
This Dynalon Vinyl Laboratory Tubing is non-toxic, flexible, and inert. It has a tensile strength of 2000 psi and is suitable for low-pressure applications. It is...
Mfr #: 226245-01 | Manufacturer: Dynalon
Dynalon LDPE Sample Vials with Hinged Lid come in 1 mL to 50 mL capacities. These general-purpose containers have push-in friction fit hinged lids. They have lightweight...
Mfr #: 230264-000W | Manufacturer: Dynalon
These Dynalon UNI Type Tissue Embedding Cassettes are available in six colors and include a clip-on lid that can be removed if desired. They are resistant to most...
Mfr #: 299334-000Y | Manufacturer: Dynalon
Plastic test tubes with color coded screw caps are available in a choice of blue, red, yellow and white. Kartell 16mm test tubes have quick closure screw caps. Plastic...
Mfr #: 301705-0001 | Manufacturer: Dynalon
Manufactured from high grade resins Great for general lab storage and sampling HDPE bottles suitable for use with food products
Manufactured from high grade resins
Great...
Mfr #: 303495 | Manufacturer: Dynalon
Use these Micro Stir Bars for stirring test tubes, micro-beakers, and other small containers. Features an Alnico V magnetic core which is one of the most powerful permanent...
Mfr #: 628565 | Manufacturer: Dynalon
Dynalon® General Use Polypropylene Bags are 0.0015" thick general-use bags useful for specimen, sample, and freezing bags. The translucent material displays inner contents....
Mfr #: 159124-0002 | Manufacturer: Dynalon
This is a Dynalon® pack of 8 inch pegs for Mega Peg drying boards. Material: Polypropylene. 12/Pack. Per each. Dynalon® #: 159124-0002.
8 inch
Polypropylene
For use with...
Mfr #: 537805-2000, 537805-0025 | Manufacturer: Dynalon
These plastic graduated cylinders feature printed crisp blue graduations that will not fade after repeated autoclaving. They are shatter resistant, reducing...
Mfr #: 307024-0500 | Manufacturer: Dynalon
This 500ml capacity dipper is totally inert and non-contaminating. The extendible screw-in shaft has a steel core for rigidity and is fully encapsulated in PTFE. The...
Mfr #: 106525 | Manufacturer: Dynalon
Large Dipper, HDPE, 32oz with 12 Ft Handle. High density polyethylene dipper for removing samples from large tanks. Made in the USA, these plastic dippers are lightweight but...