Simple, accurate, and easy to use pre mixed solutions in a wide range of levels
Used to assess method performance standards
Verify calibration accuracy and instrument performance
Strengthen your laboratory’s quality...
Checks performance of freezing-point osmometers in the critical area of normal serum values
Contains known and controlled quantities of some of the same solutes which comprise osmotically active particles of serum...
The Advanced Instruments 0.2 milliliter osmometer sample tubes are used in the freezing point chamber of the 3250 Osmometer
These sample tubes are made of plastic and are disposable
Mfr #: 898862802 | Manufacturer: DWK Life Sciences
Outstanding temperature resistance from –196 to + 260 °C
Very high chemical resistance
High leak-tightness through use of PTFE coated silicone seal
No dye...
Mfr #: 1092676 | Manufacturer: DWK Life Sciences
Very good chemical resistance and good heat resistance (max. thermal load +135 °C), constant loads longer than 30 mins should be avoided
Minimal thermal...
Mfr #: 218052453 | Manufacturer: DWK Life Sciences
Very good chemical resistance and good heat resistance (max. thermal load +135 °C), constant loads longer than 30 mins should be avoided
Minimal thermal...
Mfr #: SCOT1088678 | Manufacturer: DWK Life Sciences
Highly chemically resistant material (TPCh260), no added colours (any interference with the medium is avoided), temperature resistant from −196 to +200 °C
PTFE...
Mfr #: SCOT891088679 | Manufacturer: DWK Life Sciences
Outstanding temperature resistance from –196 to + 260 °C
Very high chemical resistance
High leak-tightness through use of PTFE coated silicone seal
No dye...
Mfr #: SCOT818013608 | Manufacturer: DWK Life Sciences
Made from DURAN® borosilicate glass 3.3 Type I
Protective dust cover is applied in-line at the end of the manufacturing process while the glass still has a...
Packaged in easy-to-use, peel-and-reseal bags, reducing solution evaporation that preserves the consistent wiper wetness level
Provide consistent, optimized cleaning efficiency with repeatable wetness and VOC levels...
Excellent wet and dry strength due to the polyester
Highly absorbent due to the cellulose
Compatible with most solvents
Contains no chemical binders
Low extractable levels
Cleaning and disinfecting hard, non-porous surfaces
Cleaning and disinfecting small surfaces (tables, equipment, isolators, hoods)
Cleaning and disinfecting large surfaces (floors, walls, ceilings)
Recommended for...
Certified Low TOC level (<50 µg/L, <50 ppb) ensures consistency in swab background contribution
Double layered, double knit polyester head entraps contaminants in the knit structure during sampling This allows...
Double layer of polyester knit fabric for enhanced absorbency
Engineered to resist snagging and abrading, preventing the release of particles and fibers
Excellent chemical compatibility with a variety of solutions...
Good chemical compatibility with a variety of solutions
Readily absorbs solvents and solutions and grabs particulates.
100% polypropylene handle ensures no additional contaminants are introduced while offering...
VIALS
Prewashed borosilicate glass vials have a one-piece cap and septa design for easy sampling and analysis
Septum thickness – 1.34 mm (0.053")
Polyethylene overcap protects septum surface from contamination until...
Low levels of ions, NVRs (non-volatile residues), particles and fibers for use in critical cleaning applications and environments.
Excellent chemical resistance for compatibility with a variety of solutions
Meets USP...
Double layer of non woven polyester fabric for enhanced absorbency
Hydro-entangled polyester for use on sensitive surfaces
Excellent chemical resistance for compatibility with a variety of solutions
Cleanroom...
This tilt specimen mount allows for easy mounting and tilting of small samples from 0° – 70°. It has index angle markings, with maximum 70° stop for EBSD. Specimen platform is 12.7mm (0.50" in diameter). Overall...
The thicker PELCO Image Tabs™ is a stiff 260µm (10mil) thick smooth conductive tab. Though not as conductive or sticky as the current 5mil PELCO Tabs™, PELCO Image Tabs™ are suitable as a photographic background and...
Pin mounts with the standard 3.2mm (1/8") pin diameter are protected and held securely in the base (cap) of the tube. Can be used for pin mounts up to 18mm diameter. Pin mounts are sold separately. Inside dimension of...
The DRI-BOX® is a small perforated plastic box containing indicating silica gel. The box is sealed on the side to prevent silica gel from spilling. The DRI-BOX® is convenient for use in smaller type desiccators of 3...
Vacuum desiccator are molded in high quality plastics which is light and easy to handle. Silicone O-ring assures tight seal down to 0°C without using grease. PP/PC material. Bottom part of the desiccators comes with...
Horizontal and crossed stage micrometers with metric or inch scales
Horizontal scales in 10, 20, 1 or 0.1mm and 0.1 inch
Crossed scales in 1x1mm
Mounted in Stainless Steel, individually numbered slide
Scales are...
Reduces Static on Surfaces
For Removing Dust from Electronics
For Removing Dust from Vinyl and CDs
Squeezing Trigger Releases Positive Ions
Releasing Trigger Releases Negative Ions
No Batteries Required
No Refills...
The Pelcotec™ CDMS-XY is easy to use and extremely convenient for quick and accurate magnification calibration of SEM, FE-SEM, FIB, CD-SEM, LM and AFM. Both the X and Y axes have graticules for easy 2-axis calibration...
Super slim tweezers with high precision, fine tips. Especially suitable for reaching in tight spaces, solvents or for working near heat sources. Made of non-magnetic stainless steel.
The PELCO® Pro Superalloy, High Precision Tweezers are manufactured using a Ni-Cr-Mo superalloy creating the highest quality tweezers. They exhibit excellent strength from room temperature up to 800°C (1472°F) with...
Mfr #: 60831D-843 | Manufacturer: DWK Life Sciences
Converted from Type I, 51 expansion borosilicate glass tubing.
White polyethylene plug style needle closures, unattached
Mfr #: 246781052 | Manufacturer: DWK Life Sciences
Complies with ISO 1042
Outstanding precision during volumetric measurement and high-quality process stability
Calibration based on the poured in volume (“In”) at...
Mfr #: 218011753, 218012458, 218013651, 218014459, 218015455, 218016357, 218017353 | Manufacturer: DWK Life Sciences
Complies with the standards in ISO 4796-1:2016 Laboratory glassware -- Bottles -- Part 1:...
Mfr #: 21802-200 | Manufacturer: DWK Life Sciences
Drip tip is provided at the lower end.
Inner tube has twelve sets of rings of indentations spaced approximately 14mm apart.
Sets are alternately horizontal and...
Mfr #: 14390-0500 | Manufacturer: DWK Life Sciences
Ideal for storage and transport of high value substances.
Wide-mouth for ease of use filling and dispensing
Quick release blue PP closure and pour ring included...
Mfr #: 850400-1420 | Manufacturer: DWK Life Sciences
Hollow, hexagonal head medium length Standard Taper stopper that is easily gripped
May be set on the flattened top to avoid contamination of the ground...
Mfr #: 5121628V-25 | Manufacturer: DWK Life Sciences
Kimble® Amber Boston Rounds are made from Type III soda-lime glass and have a narrow-mouth design. Amber bottles are designed to protect contents from UV rays...
Mfr #: 62121D-10 | Manufacturer: DWK Life Sciences
Converted from Type I borosilicate glass tubing
Serum vials are lighter in weight than molded bottles, with more closely held tolerances and uniformity of glass...
Mfr #: 74503-7 | Manufacturer: DWK Life Sciences
Converted from Type I, 33 expansion borosilicate glass tubing.
Each cellular tray contains 100 vials and has alphanumeric coordinates for fast, easy...
Mfr #: 63B92 | Manufacturer: DWK Life Sciences
DWK Life Sciences Kimble® Disposable Glass Pasteur Pipets are suitable for use in hematology, bacteriology, and in general laboratory applications, these are an...