Simple, accurate, and easy to use pre mixed solutions in a wide range of levels
Used to assess method performance standards
Verify calibration accuracy and instrument performance
Strengthen your laboratory’s quality...
Checks performance of freezing-point osmometers in the critical area of normal serum values
Contains known and controlled quantities of some of the same solutes which comprise osmotically active particles of serum...
The Advanced Instruments 0.2 milliliter osmometer sample tubes are used in the freezing point chamber of the 3250 Osmometer
These sample tubes are made of plastic and are disposable
Ultra-bright LED provides 3000 lumens at full brightness, four times the light output than a typical 100-Watt halogen light
Total internal reflection (TIR) lens with 20-degree beam angle, ideal for vessel...
Armor design provides rigidity against pipeline stress
Low profile (footprint)
Sterilizable and autoclavable
Mounting: sanitary clamp (orbital weld, Swagelok TS or flange also available)
Up to 500° F
Up to 150 PSI...
Strongest, safest, most reliable sight glass
Mounting: Sanitary clamp connection
Glass: Borosilicate or Soda Lime
Metal: Duplex or Hastelloy
Up to 572° F
FV to 230 PSI
Approvals: USP Class VI, BPE Compliant, USP Type...
Best suited for nonsterile compounding environments (Chapter <795>)
Low-lint meltblown polypropylene fabric
Reduces VOC emissions and solvent use often associated with spray options
Resealable pouch preserves...
Suitable for ISO Class 5, 7 and 8 environments
Low-lint meltblown polypropylene fabric
Resealable pouch preserves cleanliness and solvent saturation levels
Validated sterile 10-6 SAL
This tilt specimen mount allows for easy mounting and tilting of small samples from 0° – 70°. It has index angle markings, with maximum 70° stop for EBSD. Specimen platform is 12.7mm (0.50" in diameter). Overall...
The thicker PELCO Image Tabs™ is a stiff 260µm (10mil) thick smooth conductive tab. Though not as conductive or sticky as the current 5mil PELCO Tabs™, PELCO Image Tabs™ are suitable as a photographic background and...
Pin mounts with the standard 3.2mm (1/8") pin diameter are protected and held securely in the base (cap) of the tube. Can be used for pin mounts up to 18mm diameter. Pin mounts are sold separately. Inside dimension of...
The DRI-BOX® is a small perforated plastic box containing indicating silica gel. The box is sealed on the side to prevent silica gel from spilling. The DRI-BOX® is convenient for use in smaller type desiccators of 3...
Vacuum desiccator are molded in high quality plastics which is light and easy to handle. Silicone O-ring assures tight seal down to 0°C without using grease. PP/PC material. Bottom part of the desiccators comes with...
Horizontal and crossed stage micrometers with metric or inch scales
Horizontal scales in 10, 20, 1 or 0.1mm and 0.1 inch
Crossed scales in 1x1mm
Mounted in Stainless Steel, individually numbered slide
Scales are...
Reduces Static on Surfaces
For Removing Dust from Electronics
For Removing Dust from Vinyl and CDs
Squeezing Trigger Releases Positive Ions
Releasing Trigger Releases Negative Ions
No Batteries Required
No Refills...
The Pelcotec™ CDMS-XY is easy to use and extremely convenient for quick and accurate magnification calibration of SEM, FE-SEM, FIB, CD-SEM, LM and AFM. Both the X and Y axes have graticules for easy 2-axis calibration...
Super slim tweezers with high precision, fine tips. Especially suitable for reaching in tight spaces, solvents or for working near heat sources. Made of non-magnetic stainless steel.
The PELCO® Pro Superalloy, High Precision Tweezers are manufactured using a Ni-Cr-Mo superalloy creating the highest quality tweezers. They exhibit excellent strength from room temperature up to 800°C (1472°F) with...