Easy application and removal for short- and long-term storage
Provide tight seal to minimize evaporation and condensation and enables oil-free operation when used with thermal cyclers with heated lids
Suitable for...
Approximate dimensions: 30mm O.D.; 115mm length
Sterilized by gamma irradiation, noncytotoxic and nonpyrogenic
Dark blue printed graduations and white writing patch
Polyethylene flat-top screw cap allows one hand...
175 mL capacity: approximate dimensions are 61mm O.D.; 118mm length
Sterilized by gamma irradiation
Molded graduations
Polyethylene plug-seal screw cap
Approximate dimensions: 17mm O.D.; 120mm length
Sterilized by gamma irradiation, noncytotoxic and nonpyrogenic
Dark blue printed graduations and white writing patch
Polyethylene dome-seal screw cap offers positive...
Widely used and referenced in laboratory protocols
Dual position snap-cap prevents sample loss with ease of handling
Sterile, nonpyrogenicity tested to less than 0.1 EU/ mL
Polystyrene, disposable pipets for tissue culture, bacteriological, and research applications
Sterile
RNase-/DNase-free
Noncytotoxic, nonpyrogenicity tested to less than 0.1 EU/mL
BSE/TSE-free
Negative graduations...
Mfr #: 8388, 8390, 8393, 8396 | Manufacturer: Corning
Media bottle has a wide mouth for filling ease, and is used for sample holding, storing, mixing, and sampling applications
Polystyrene body for durability and...
Highly breathable fabric releases heat while maintaining a high level of protection
Garments feature elastic in high movement areas for ease of movement and appropriate fit
100% bound seam construction for increased...
Reduced training time and gowning time because the sleeve is pre-folded to be gowned right
Better efficiency and performance in gowning qualifications and re-qualifications
Risk of operator contamination is greatly...
Veltek® CleanPrint10 is a low particulate and non-shedding synthetic writing substrate for use in cleanrooms. It is exceptionally durable, tear, abrasion and chemical resistant, easy to write on, and double bagged...
Prefiltered to 0.2 µm
Completely traceable and validated for sterility and shelf life
Sterile WFI solutions use USP Water for Injection, are gamma irradiated
Solution available in nonsterile, sterile, and sterile WFI...
Prefiltered to 0.2 um
Completely traceable and validated for sterility and shelf life
60% and 91% formulated with USP Water for Injection, and are gamma irradiated; 99% manufactured via aseptic filtration.
Effective as a broad spectrum hospital disinfectant, fungicide, deodorizer, virucide
Food and non-food contact sanitizer effective against a broad spectrum of pathogenic bacteria
Available as both sterile and...
For removal of chemical residues, spotting and staining on stainless-steel surfaces without leaving a powdery residue.
Ideal on stainless steel, chromes, brass aluminum, or copper.
Filtered at 0.2 μ
Gamma irradiated
Each sterile container is double bagged in easy tear packaging
Quadruple bagged in the ABCD Cleanroom Introduction System®
Individually labeled with lot number and expiration
Delivered with lot specific analytical...
Filled in an ISO 5 (Grade A/B, Former Class 100)
Prefiltered to 0,2 um
Completely traceable and validated for sterility and shelf life
Avaliable in 3% and 6% concentrations
16 oz and 32 oz containers come with...
Available in ABCD Cleanroom Introduction SystemTM
Formulated with WFI
Validated for sterility and shelf life
Available in two different percentage solutions of Hydrogen Peroxide at 3% or 6% to fit specific needs
100%...
Each sterile bag is double bagged in easy tear bags
Quadruple bagged via the ABCD Cleanroom Introduction System®
Packaged in an opaque bag
Individually labeled with lot number and expiration
Reduces VOC emissions
Low...
ISO 4 (Class 10) Cleanliness
Delivered with lot specific documentation
Validated for sterility and shelf life
12”x12” in size
Removes residues from disinfecting agents
Re-sealable packaging
100% synthetic filament...
Available in ABCD Cleanroom Introduction System®
Formulated with WFI
Validated for sterility and shelf life
Available in three different percentage solutions of Sodium Hypochlorite at 0.25%, 0.52%, or 5.25% to fit...
Approximate dimensions: 30mm O.D.; 115mm length
Sterilized by gamma irradiation, noncytotoxic and nonpyrogenic
Dark blue printed graduations and white writing patch
Polyethylene flat-top screw cap allows one hand...
Supplied nonsterile and are autoclavable
External graduations and frosted writing spot for easy sample identification
Positive seal design allows for repeated opening and closing
Flat cap surface for convenient...
Will withstand up to 14,000 RCF
Snaplock cap assures efficient seal
Thin membrane in cap center allows easy access to sample by syringe needle
RNase-/DNase-free Nonpyrogenic
10 mL deep well plate with rectangular wells
ANSI/SLAS 1-2004: Microplates - Footprint Dimensions
Ultra-flat surface ensures proper sealing with heat sealing film
Sterile
Mfr #: 430921 | Manufacturer: Corning
Maximum RCF is 3,000 xg
Temperature range from -80°C to 120°C
5 year shelf life
Leak proof design
Easy-on/easy-off cap
Clear accurate graduations
Large white marking spots...
Mfr #: 430517 | Manufacturer: Corning
Cellulose acetate (CA) membranes provide fast flow rates and low protein binding and are good for filtering cell culture media.
1000 mL receiver bottles feature easy grip...
Mfr #: 3935 | Manufacturer: Corning
Lids are made of rigid polystyrene
Lids have a corner notch on the A1 corner to correspond to the corner notches found on all Corning® microplates
Lids do not fit Corning 2 µL...
Mfr #: 3617858
You have a low level of body fluids (isotonic dehydration)
You have a low level of body fluids and your blood sodium level is abnormally low (hypotonic dehydration)
You have a low blood chloride level...
Mfr #: 2975-223, 2975-225, 2975-244, 2975-245, 2975-246Manufacturer: Corning
Corning Optical Cover Glasses are made of special, optically clear, water-white, borosilicate glass. They are resistant to surface attach or...
Mfr #: 430791 | Manufacturer: Corning
Superior Performance
Maximum RCF is 12,500 xg
Temperature range from -80°C to 120°C
5 year shelf life
Ease of Use
Leak proof design
Easy-on/easy-off cap
Clear accurate...
Mfr #: 11680 | Manufacturer: Corning
Corning polystyrene Storage Bottles are now available as closed system solutions. They are sterile and arrive individually double-bagged and preassembled. The preassembled...
Mfr #: 32940-50C | Manufacturer: Corning
Crucibles have 40mm diameter coarse porosity (40 to 60µm) fritted discs
Crucibles are designed for analytical work where precipitates are dried to constant weight at...
Mfr #: 3883 | Manufacturer: Corning
Bottoms are 60% thinner than conventional polystyrene plates, resulting in lower background fluorescent and enabling readings down to 340nm
Designed to reduce well-to-well...
Mfr #: 431418 | Manufacturer: Corning
2 mL capacity with round bottom
Self-standing design
Black graduations and larger marking spots for easier filling and sample identification
Manufactured from polypropylene...
Mfr #: 70800-13 | Manufacturer: Corning
These Corning PYREX® VISTA™ 9 mL test tubes are well annealed, resistant to heat and chemically stable. These 13x100mm tubes have a blue marking spot. Beaded rims are...
Mfr #: TXL-10-L | Manufacturer: Corning
Corning Axygen® Universal Tips are designed to fit a wide variety of single and multi-channel pipettors, compatible with most popular brands of pipettors. These...
Mfr #: 431532 | Manufacturer: Corning
Good for storage of media, buffers and other aqueous solutions
Large 37mm opening provides easier access for liquid transfer
Screened white enamel graduations are easier to...